Septic System Installation in Miami-Dade County
A new or replacement system in Miami-Dade County starts with a soil test and a permit — not a shovel.
Installing a septic system is the largest-ticket job a septic owner faces, and the design is dictated by your land: soil type, how fast it percolates, and how high the water table sits all decide what system you're allowed to build and what it costs.
Every legal install begins with a site evaluation and a county permit. The output of that evaluation — conventional drainfield, engineered mound, or an aerobic/nitrogen-reducing unit — is what drives the final price far more than the tank itself.
Local ground is the deciding factor in Miami-Dade County: almost no natural separation, so systems depend on fill and are quick to flood. And the rules here matter — filled/mounded systems are the norm given the high water table and rock, which can raise the cost of a new system considerably.
How a septic installation works
- Site & soil evaluation. A licensed evaluator or engineer tests percolation and locates the seasonal high water table to determine what the soil can handle.
- System design. The system is sized to your soil and the number of bedrooms, and the type is chosen — conventional, mound/filled, or aerobic.
- County permit. Plans are submitted to the county health department for an OSTDS construction permit before any work begins.
- Tank and drainfield install. The tank is set and the drainfield is built to spec, with fill brought in where the water table requires elevation.
- Final inspection. The county inspects the open system and signs off before it's covered and put into use.
- System type — conventional vs. mound vs. aerobic/nitrogen-reducing
- Soil and water table (high water tables require expensive fill)
- Drainfield size, which scales with bedroom count
- Permit and engineering/site-evaluation fees
- Site access and how much excavation is needed
- Tank material and capacity
- Use a licensed Registered or Master Septic Tank Contractor
- Make sure they pull the county permit (never skip it)
- Insist the design matches your soil/site evaluation
- Get the warranty and final county approval in writing
29 septic system installation providers in Miami-Dade County
License-verified contractors (active state license) are listed first.
Antonio Garcia
Verified · Lic. SR0101664Bryan Zero
Verified · Lic. SR0161772Dura Bryant
Verified · Lic. SR0141734Francisco Casanova
Verified · Lic. SR0031146Guillermo Suarez Iii
Verified · Lic. SR0221943Guillermo Suarez Jr
Verified · Lic. SM0890867James Rose
Verified · Lic. SR0890415Javier Rivero
Verified · Lic. SR0001344Jorge Casanova
Verified · Lic. SR0121705Jorge Millan
Verified · Lic. SM0971292Jose Bolanos
Verified · Lic. SR0971276Jose Sibila
Verified · Lic. SR0061502Jose Smith
Verified · Lic. SR0890882Juan Hernandez
Verified · Lic. SR0991449Juliet V'miranda
Verified · Lic. SR0231959Kemble Ettrick
Verified · Lic. SR0061536Lewdy Toledo
Verified · Lic. SR0101662Michelet Petit
Verified · Lic. SR0031425Ramon Ceballos Jr
Verified · Lic. SR0191850Raul V'miranda
Verified · Lic. SR0141736Roberto Rodriguez
Verified · Lic. SM0021421Santiago Martin
Verified · Lic. SR0900928Sarima Batista
Verified · Lic. SM0181814Saturnino Alfonso
Verified · Lic. SR0221925William Woodard
Verified · Lic. SR0001342Yerandis Leal
Verified · Lic. SR0181820Yerobis Leal
Verified · Lic. SR0991445Yusleidy Abreu
Verified · Lic. SR0241991Septic System Installation in Miami-Dade County — FAQ
What does a new septic system cost in Miami-Dade County?
Conventional systems commonly run from several thousand dollars to well over $10,000; mound and nitrogen-reducing systems cost more. Soil and water-table conditions in Miami-Dade County are the biggest cost driver.
Do I need a permit to install a septic system in Miami-Dade County?
Yes. Permits are issued by the Florida Department of Health in Miami-Dade County (Environmental Health / Onsite Sewage), operating under FDEP's statewide OSTDS program., and the system must pass inspection before use.
How long does an installation take?
Once permitted, the install itself is often 1–3 days, but evaluation and permitting can add weeks. Plan ahead.